Mini 4WD Wiki

Editing

Basic:Reinforced plate

1
  • The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit. If you are undoing an edit that is …
Latest revision Your text
Line 1: Line 1:
 
{{Basics}}The '''reinforced plates''' {{Translation|補強プレート|Hokyō Purēto}} are the crucial Mini 4WD parts that can be attaches to, replaces and/or widen the front bumper and the rear roller stay.
 
{{Basics}}The '''reinforced plates''' {{Translation|補強プレート|Hokyō Purēto}} are the crucial Mini 4WD parts that can be attaches to, replaces and/or widen the front bumper and the rear roller stay.
   
== How the reinforced plate works ==
+
== General info ==
As the Mini 4WD car was tuned faster, the bumper and the rear stay might not able to withstands the impacts and will eventually breaks apart. This is where the reinforced plates comes to play.
 
 
The main purpose of the reinforced plates is to either strengthens the chassis's [[Basic:Bumper|bumper]] and [[Basic:Rear stay|rear stay]], widen them, or both. For FRP and CFRP-based reinforced plates, applying the super-glue to the edge of the FRP plates will improves their tensile strength.
 
 
It is also known that decking one or more of reinforced plates on top of the another plates will improves one parts' tensile strength and yield strength.
 
 
The reinforced plates are generally required for [[Basic:Bumperless setup|bumperless setups]].
 
 
== The materials ==
 
 
Currently, there are four types of the reinforced plate's materials available: aluminum, fibre-reinforced plastic (FRP), duralumin and carbon-fibre-reinforced plastic (CFRP).
 
Currently, there are four types of the reinforced plate's materials available: aluminum, fibre-reinforced plastic (FRP), duralumin and carbon-fibre-reinforced plastic (CFRP).
   
Line 61: Line 61:
 
* [[HG Carbon Rear Stay (3 mm)]]
 
* [[HG Carbon Rear Stay (3 mm)]]
 
* [[Multi-Roller Setting Stay|HG Carbon Rear Multi Roller Setting Stay (3mm)]]
 
* [[Multi-Roller Setting Stay|HG Carbon Rear Multi Roller Setting Stay (3mm)]]
* [[HG Carbon Stay for Wide Sliding Damper]][[Category:Basics of Grade-up Parts]]
+
* [[HG Carbon Stay for Wide Sliding Damper]]
  +
  +
== Trivia ==
  +
* It is known that applying the super-glue to the edge of the FRP plates will improves their tensile strength.
  +
* Decking 2 or more of reinforced plates will improves one parts' tensile strength and yield strength.
  +
* The reinforced plates are generally required for bumperless car setups.
  +
[[Category:Basics of Grade-up Parts]]
  Loading editor
Below are some commonly used wiki markup codes. Simply click on what you want to use and it will appear in the edit box above.

View this template