FANDOM


m
(Correcting katakana)
Line 1: Line 1:
{{Infobox Mini 4wd info|no. = Unknown|series = [[Fully-Cowled Mini 4WD]]|chassis = [[AR Chassis]]|rel = Spring 2016|In fictional media = Yes|First Appearance = ''[[Bakusou Kyodai Let's & Go! Return Racers!]]''|Owner = Crusher Jiro}}'''Beak Stinger G''' (ビクスティンガーG) is a upcoming [[Fully-Cowled Mini 4WD]] car by Tamiya. It is planned to be released during spring 2016.
+
{{Infobox Mini 4wd info|no. = Unknown|series = [[Fully-Cowled Mini 4WD]]|chassis = [[AR Chassis]]|rel = Spring 2016|In fictional media = Yes|First Appearance = ''[[Bakusou Kyodai Let's & Go! Return Racers!]]''|Owner = Crusher Jiro}}'''Beak Stinger G''' (ビクスティンガーG) is a upcoming [[Fully-Cowled Mini 4WD]] car by Tamiya. It is planned to be released during spring 2016.
   
 
It was featured in the manga [[Bakusou Kyodai Let's & Go! Return Racers!|''Bakusou Kyodai Let's & Go! Return Racers!'']] as Crusher Jiro's machine.
 
It was featured in the manga [[Bakusou Kyodai Let's & Go! Return Racers!|''Bakusou Kyodai Let's & Go! Return Racers!'']] as Crusher Jiro's machine.

Revision as of 16:35, February 1, 2016

Beak Stinger G
No. Unknown
Series Fully-Cowled Mini 4WD
Chassis(s) AR Chassis
Release Date Spring 2016
In fictional media
First Appearance Bakusou Kyodai Let's & Go! Return Racers!
Owner Crusher Jiro
Beak Stinger G (ビークスティンガーG) is a upcoming Fully-Cowled Mini 4WD car by Tamiya. It is planned to be released during spring 2016.

It was featured in the manga Bakusou Kyodai Let's & Go! Return Racers! as Crusher Jiro's machine.

General

Being a combination of Beak Spider, Ray Stinger and Brocken Gigant, it has all the design feature of all three cars. It is consists of the front parts of Ray Stinger, the front side-guard and canopy of Brocken Gigant and the rear parts of Beak Spider. It is currently unknown what the kit's bodyshell's color will be without painting.

It comes with the red low-diameter 5-spokes wheels with low-profile slick tires. The sub-parts of the chassis are molded in gray.

In the manga

In the flashback episodes of Return Racers, shortly after his gang's minicars destroyed the Ohgami trio's minicars, Crusher Jiro reconstructs them into one new car: the Beak Stinger G. It inherited all 3 special moves from the Ohgami trio's cars.

He later challenge Go and Retsu with his new car, resulting in Retsu's Hurricane Sonic and later, Go's Cyclone Magnum being damaged. Despite this, the Seiba brothers did reconstructs and combined their cars into one car and resume their race.

When his Beak Stinger G got badly damaged, Jiro tries to repair it. However, it suddenly moves away from Jiro as he tries to do so, and liquids were leaking from the front parts as if it is crying. Jiro himself didn't noticed that he, himself, have sheds tears after hearing from Go and Retsu that Mini 4WD cars are keep running because they believes its racers.

Both racers were resumes their race as they have finished repaired their cars. In the end, the Seiba brother had won the race. After the race, Jiro restores the Beak Stinger G back into the Beak Spider, Ray Stinger and Brocken Gigant and return them to their owners.[1]

Technical info

Length: 155 mm

Width: 97 mm

Height: N/A

Chassis: AR Chassis

Gear set(s): 3.5:1

References

  1. Chapter 3 and Chapter 4 of Bakusou Kyodai Let's & Go! Return Racers!

Trivia

  • Similar to other cars in the Let's & Go! series, it doesn't have any front bumper in the manga, whereare in real-life, the car has the front bumper which is part of its AR Chassis.

See also

Community content is available under CC-BY-SA unless otherwise noted.