FANDOM


Roborace Devbot 2.0
No. 18656
Series Mini 4WD PRO
Chassis(s) MA Chassis
Release Date 2020

The Roborace Devbot 2.0 (Japanese: ロボレース デボット2.0, Roborēsu Debotto Ni-ten-zero) is a Mini 4WD PRO car released by Tamiya in 2020.

It is based on the autonomous electric racecar of the same name. Specifically, the one that the University of Pisa racing team used in the first Season Alpha racing season held in 2019.

General info

The Devbot features the low-height, LMP-inspired race car body design, with the low-height bonnet on the front and large rear spoiler on the rear.

Standard variant

The standard variant features the black body color, with yellow, orange, red and cyan stripes on it, with various decals ('Roborace' and 'Season Alpha') on it and the car number 9 on its nose and winglets.

It was equipped with the black, small diameter low-profile fin-type wheels paired with the black low-profile slick tires. The chassis frame and A parts were molded in black and orange respectively.

About the real-life vehicle the Mini 4WD car is based on

The Devbot 2.0, was unveiled in 2019. Compare to the Roborcar which has futuristic design, the Devbot 2.0's body design is based on that of the Le Mans Prototype race car. It succeeds the first Devbot car.

The main bathtub chassis frame made out of carbon fiber is the same one used in the Ginetta LMP3 cars and the first Devbot car, but now with the proper carbon fiber outer shells equipped. Powering the car is a pair of electric motor at the rear wheels that are capable of produce around 180hp of power and 300N∙m of torque per wheel, for the total of 360hp of power and 600N∙m of torque. The car is runinnig on the 840V battery.

The car was equipped with 6 cameras, 2 radars, 18 ultrasound sensors and 5 lidar sensor, which transmit data to the car's AI running on the Nvidia Drive PX 2 platform.

Unlike the Robocar which has no driver seat, the Devbot 2.0 was built to have a space for human driver. It can switch between non-autonomous mode and autonomous mode.

Technical info

Variant Body Chassis Wheels Tires Motor Dimensions Gear

Standard
(19656)

Color: Black
Material: ABS

Type: MA
Frame: Black, ABS
A parts: Orange, POM

Size: Small
Type: Fin-type Low-Profile
Spoke: 6
Fitment: Squared
Color: Black
Material: Polypropylene

Size: Small
Type: Low-Profile Slick
Color: Black
Material: Med. Elastomer

Standard

Length: 156
Width: 97
Height: N/A

3.5:1

Gallery

Boxart

External links

Tamiya America

Mini 4WD PRO series
MS Nitro Thunder · Nitro Force · Torcruiser · Veldaga · Rayvolf · Exflowly · TRF-Racer Jr. · Avante Mk.II · Manta Ray Mk.II · Avante X · Neo Falcon · Keen Hawk Jr. · Nitrage Jr. · Thunder Shot Mk.II · BisonMagnum · RodeoSonic · Savanna Leo · Hotshot Jr.* · Dash-1 Emperor* · Avante Mk.III · Dash-2 Burning Sun* · Tridagger XX · Dash-3 Shooting Star* · Spin-Axe Mk.II · Dash-01 Super Emperor* · Rising Edge · Slash Reaper Red Special · Astralster
MA Blast Arrow · Heat Edge · Festa Jaune · Tri Gale · Abilista · Raikiri · Shooting Proud Star · Spark Rouge · Rise-Emperor · Kumamon Mini 4WD - Supporting Kumamoto · God Burning Sun · Silwolf · Mini 4WD Shirokumakko GT · Mini 4WD Panda Racer GT · Mini 4WD Kumamon Version GT · DCR-01 · Hyundai Avante Sport · Cannon D Ball · Mad Laser · Mini 4WD Lupine Racer GT · Mini 4WD Dog Racer GT · Mini 4WD Hawk Racer GT · Toyota Gazoo Racing TS050 Hybrid · Mini 4WD Owl Racer GT · Dancing Divine Doll · DCR-02 · Hexagonite · Mini 4WD Pig Racer GT · Toyota Gazoo Racing WRT/Yaris WRC · Hyundai i20 Coupe WRC · Toyota GR Supra · Roborace Devbot 2.0 · Over the Horizon
Starter Pack Avante Mk.III Race-Ready Set · Mini 4WD Starter Pack MA Power Spec
* denotes Mini 4WD PRO chassis re-release of a Racing Mini 4WD car
Community content is available under CC-BY-SA unless otherwise noted.