Mini 4WD Wiki

Editing

Super-II Chassis

1
  • The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit. If you are undoing an edit that is …
Latest revision Your text
Line 1: Line 1:
[[File:SuperIIChassisLogo.png|thumb|220x2020px]][[File:Super-II Chassis.jpg|thumb|220x220px|Super-II Chassis]]
+
[[File:Super-II Chassis.jpg|thumb|220x220px|Super-II Chassis]]
The '''Super-II Chassis''' {{Translation|スーパーIIシャーシ|Sūpā Tsū Shāshi}} is a Mini 4WD chassis released by Tamiya in December 2010, with the release of [[Magnum Saber|Magnum Saber Premium.]] The chassis is the further improved version of the [[Super-1 Chassis]].
+
The '''Super-II Chassis''' (スーパーIIシャーシ) is a Mini 4WD chassis released by Tamiya in 2010, with the release of [[Magnum Saber|Magnum Saber Premium.]] The chassis is the further improved version of the [[Super-1 Chassis]].
   
 
== General info ==
 
== General info ==
Line 7: Line 7:
 
Some kits came with the Side-Guard EX attachment which can be installed on under the middle of the chassis.
 
Some kits came with the Side-Guard EX attachment which can be installed on under the middle of the chassis.
   
Performance-wise, it behaves similar to that of [[VS Chassis]], except that Super-II Chassis has greater adaptability than VS Chassis.
+
Performance-wise, it behaves similar to that of [[VS Chassis]], except that Super-II Chassis has greater expandability than VS Chassis.
   
 
== Technical info ==
 
== Technical info ==
{{Chassis data|Length = 151 mm (With rear roller stay)|Width = 97 mm|Wheelbase = 80 mm|Ground Clearance = 5.8 mm (With large-diameter wheels)<br>2.8 mm (With small-diameter wheels)|Driveshaft Length = 60 mm|Gear Set = 5:1<br>4.2:1<br>4:1<br>3.7:1<br>3.5:1|Terminal Type = Super-II-type|Weight = '''With batteries:'''<br>{{tt|115 g|With large diameter wheels}}<br>'''Without batteries:'''<br>{{tt|57 g|With small diameter low-profile wheels}}|Down Thrust Angle = 5}}
+
{{Chassis data|Length = 151 mm (With rear roller stay)|Width = 97 mm|Wheelbase = 80 mm|Ground Clearance = 5.8 mm (With large-diameter wheels)<br>2.8 mm (With small-diameter wheels)|Driveshaft Length = 60 mm|Gear Set = 5:1, 4.2:1, 4:1, 3.7:1, 3.5:1|Terminal Type = Super-II-type|Weight = 115 g (With large-diameter wheels and alkaline batteries)}}
{{Chassis stats|Toughness = 3|Images = [[File:S2ChassisStats.jpg|150 px]]|Acceleration = 5|Cornering = 5|Stability = 3|Adaptability = 4.5|Ease of Maintenance = 3}}
 
   
 
== Trivia ==
 
== Trivia ==
 
* While most of the Mini 4WD cars equipped with Super-II Chassis are molded in normal ABS plastic, the chassis that came with the [[Magnum Saber|Magnum Saber Premium]], [[Sonic Saber|Sonic Saber Premium]] and [[Tridagger X|Tridagger X Premium]] were molded in polycarbonate-mixed ABS plastic, while the chassis that came with the [[Victory Magnum|Victory Magnum Premium]] and the [[Vanguard Sonic|Vanguard Sonic Premium]] were molded in carbon-mixed ABS plastic.
 
* While most of the Mini 4WD cars equipped with Super-II Chassis are molded in normal ABS plastic, the chassis that came with the [[Magnum Saber|Magnum Saber Premium]], [[Sonic Saber|Sonic Saber Premium]] and [[Tridagger X|Tridagger X Premium]] were molded in polycarbonate-mixed ABS plastic, while the chassis that came with the [[Victory Magnum|Victory Magnum Premium]] and the [[Vanguard Sonic|Vanguard Sonic Premium]] were molded in carbon-mixed ABS plastic.
   
* A while after the release of Super-II Chassis, there are complaints that the screw that holds the gearbox would become loose due of frequent removes and reattaches. Tamiya would later includes the [[Reinforced Gears with Easy Locking Gear Cover|easy locking gear cover]] (originally a Grade-Up Parts) as standard in most Super-II Chassis cars starting with [[Dash-1 Emperor|Dash-1 Emperor Premium]].
+
* A while after the release of Super-II Chassis, there were complaints that the screw that holds the gearbox would become loose due of frequent removes and reattaches. Tamiya would includes the [[Reinforced Gears with Easy Locking Gear Cover|easy locking gear cover]] (originally a Grade-Up Parts) as standard in every Super-II Chassis cars starting with [[Dash-1 Emperor|Dash-1 Emperor Premium]].
 
* This is the first Mini 4WD chassis to be recalled. Soon after the release of Magnum Saber Premium, Tamiya discovered the mold defects on the chassis and recalled all of the original Magnum Saber Premium kits. This since has been fixed with the second mold revision.
 
* This is the first Mini 4WD chassis to be recalled. Soon after the release of Magnum Saber Premium, Tamiya discovered the mold defects on the chassis and recalled all of the original Magnum Saber Premium kits. This since has been fixed with the second mold revision.
 
* The hole on the centerfront of the front bumper was designed to allows the attachment of certain bodyshell's additional parts. (i.e. [[Liberty Emperor]] and [[Dash-001 Great Emperor]]'s front spoiler)
 
* The hole on the centerfront of the front bumper was designed to allows the attachment of certain bodyshell's additional parts. (i.e. [[Liberty Emperor]] and [[Dash-001 Great Emperor]]'s front spoiler)
 
{{Navbox Chassis}}
 
{{Navbox Chassis}}
 
[[Category:Super series chassis]]
 
[[Category:Super series chassis]]
[[Category:Chassis]]
+
[[Category:Mini 4WD chassis]]
  Loading editor
Below are some commonly used wiki markup codes. Simply click on what you want to use and it will appear in the edit box above.

View this template