FANDOM


Line 12: Line 12:
 
==Trivia==
 
==Trivia==
 
*Along with the Type-1 Chassis, the Type-3 Chassis is one of the only chassis to have two pinion gear sets.
 
*Along with the Type-1 Chassis, the Type-3 Chassis is one of the only chassis to have two pinion gear sets.
*The Type-3 is the only chassis that can be use the [[Competition Gear Set]] GUP in the official Mini 4WD race tournament.{{Navbox Chassis}}[[Category:Mini 4WD chassis]]
+
*The Type-3 is the only chassis that can use the [[Competition Gear Set]] GUP in the official Mini 4WD race tournaments.<ref>[http://www.tamiya.com/japan/cms/serviceregulation/1873-regulationgear.html Mini 4WD Grade-Up Parts Matching List (Japanese)]
  +
</ref>
  +
  +
== References ==
  +
<references />{{Navbox Chassis}}
  +
[[Category:Mini 4WD chassis]]
 
[[Category:Type series chassis]]
 
[[Category:Type series chassis]]

Revision as of 04:00, February 22, 2016

Type3Chassis

Type-3 Chassis

The Type-3 Chassis (タイプ3シャーシ) is a Mini 4WD chassis released by Tamiya. It was first equipped with the Rising Bird.

General info

The Type-3 is the updated and improved version of the Type-1 Chassis.

Many features from the Type-2 Chassis, such as driveshaft bearing attachments (with plastic/brass bearings equipped by default), battery clip and guide rollers, are now standards for this chassis. In additions, the chassis also includes holes to dissipate heats and reduce weight. The ground gear and propeller shaft's position has been modified to minimized the power loss. Both the front bumper and the side-guards now has the additional screw holes for guide rollers.

However, since it was actually the updated version of Type-1, the chassis is still having the potential to flip over due of its high ground-clearance, which can be solved by using either the rear roller stay parts or using the low gear ratio setup.

The Type-3 Chassis was later modified into Truckin' Chassis.

Technical info

Length/Width/Wheelbase: 127 mm/81 mm/82 mm
Ground clearance: Unknown
Driveshaft's length: 60 mm
Compatible gear set(s): 4:1 (through Competition Gear Set), 5:1, 6.4:1, 8.75:1, 11.2:1
Terminal type: A-type terminal
Weight (Chassis frame only): Unknown

Trivia

  • Along with the Type-1 Chassis, the Type-3 Chassis is one of the only chassis to have two pinion gear sets.
  • The Type-3 is the only chassis that can use the Competition Gear Set GUP in the official Mini 4WD race tournaments.[1]

References

  1. Mini 4WD Grade-Up Parts Matching List (Japanese)
Chassis
Original series Origin · Comical · Wild · Cruiser · RV
Type series
(Racing/Truckin')
Type-1 · Type-2 · Type-3 · Type-4 · Zero · FM · Truckin' · Type-5
Super series
(Super/Mighty, Fully Cowled/Aero)
Super-1 · Super-FM · Super TZ · Super X · VS · Super TZ-X · Super XX · Super-II
Mini-F series Mini-F
R/C Mini 4WD TR-1
PRO/REV MS · AR · MA · FM-A · VZ
Community content is available under CC-BY-SA unless otherwise noted.